Charger, battery instructions
：
·
This product can be used for chargers that meet the corresponding national or regional
standards and are compatible with PD3.0 fast charge protocol. (It is recommended to use a
charger with a power of 45W and above to charge, and the charger with a smaller power will
fail during the process of charging and using the product, which is caused by the smaller
power of the charger, not equipment failure or battery failure)
·
Fully charging a fully drained battery at room temperature (23°C) takes about 4 hours and 30
minutes. The time required to charge the battery varies greatly depending on the ambient
temperature and the remaining battery power. And charging during use will make the
charging time longer.
·
For safety reasons, charging at low temperatures (5°C - 10°C) takes longer (up to about 6
hours).
·
The battery was not fully charged at the time of purchase.
·
Charge the product battery before use.
·
Charge the product the day before or on the same day you use it.
·
Even during storage, a charged battery will gradually discharge and lose its charge.
·
After charging, remove the charger from the power socket in time
·
Chargers compatible with the protocol can also be used abroad. The charger input power
supply is compatible with 100 V AC to 240 V AC, 50/60 Hz power supply. If necessary, please
another device or computer, use this product to format that memory card.
11
