24
2.
Open the sensor enclosure by pulling the two
pieces apart. The two pieces are joined by wiring;
use care to not damage the wiring.
3.
Pull the battery assembly free from the
mounting tape by using a gentle prying motion
with your fingers.
The preinstalled battery in your Water Depth
Sensor should give you upwards of 10 years
between battery changes. When it is time to
replace the battery, please replace it using only a
part number G.34615 battery, available on our
website, and follow these instructions:
1.
Using a small or medium Phillips screwdriver,
remove the four screws on the front of the
enclosure as shown. Carefully set them to the
side.
Battery Replacement
Q