![background image](http://html1.mh-extra.com/html/yolink/ys7904-uc/ys7904-uc_installation-and-user-manual_3463512025.webp)
About YoLink
Control
YoLink
Control
is our unique device-to-device control technology. Using YoLink
Control
, YoLink
devices can be controlled without the Hub or an internet connec on. (Use of YoLink
Control
is
op onal; you can use the Automa on feature in the app OR use YoLink
Control
, but YoLink
Control
offers the benefit of opera on without the Hub or internet connec on.)
One device controls another, directly. A device that sends out commands is called the controller. A
device that receives the commands is called the responder. Examples of a controller are a Water
Leak Sensor, while examples of a responder are a Siren or a Gas/Water Valve (Controller)
To configure your Water Leak Sensor 2 as a controller, press and hold the SET bu on for 5-10
seconds un l the LED quickly blinks green
Upon pairing, the LED will stop blinking (this may happen a er only blinking two or three mes)
To configure a
Valve
as the responder, ensure the
Valve
Gas/Water
Controller
Gas/Water
Controller
Gas/Water Valve Controller manual)
(refer to
has already been bound to the YoLink
app. Using the app, close the valve (verify the valve is shown to be Closed on the app, or press
the Close bu on if it is shown as Open). Press and hold the SET bu on for 5-10 seconds un l
the LED quickly blinks green
Pairing
The Water Leak Sensor 2 can only work as the controller in YoLink
Control
23