1
.
Turn off the power to the switch at the main circuit breaker or fuse panel.
Installation
Important
All wiring connections must be made after power down to avoid personal injury and/or
damage to the switch.
This device is intended for installation in accordance with the national electric code and
local regulations in the United States, or Canadian electrical code and local regulations
in Canada.
If you are unsure or uncomfortable about performing this installation, consult a qualified
electrician.
The fixture controlled by the in-wall switch must not exceed 960 watts (incandescent),
800w (10A) resistive or hp motor. The switch is designed only for use with permanently
installed fixtures.
WARNING: SHOCK HAZARD
May result in serious injury or death.
Turn off power at circuit breaker or
fuse before installing.
7
