5
6. General setting
All parameters can only be set when your e-bike stops.
The steps for general setting are as follows:
In the power-on state, when the display shows the speed of 0,
6.1 Trip distance reset
Press and hold the buttons
and
at the same time for more than 2 seconds to reset the trip distance.
6.2 Factory reset
dEF refers to factory reset. dEF-n represents not to restore factory settings, and dEF-y represents to restore factory
settings. Press and hold the buttons
and
at the same time for more than 2 seconds to enter the factory reset
interface, and press the button
/
to select a parameter.
Fig. 6-1 Factory Reset Interface
7. Custom setting
All parameters can only be set when your e-bike stops.
The steps for custom setting are as follows:
In the power-on state, when the display shows the speed of 0,
(1) Press and hold the buttons
and
at the same time for more than 2 seconds to enter the selection interface of
custom setting options;
(2) Press the button
/
to switch the selection interface of general setting options, and press the button
to
enter the parameter modification interface;
(3) Press the button
/
for parameter selection;
(4) Press the button
to save the parameter and return to the selection interface of custom setting options;
(5) Press and hold the button
to save the parameter and exit the selection interface of custom setting options.
7.1 Rated voltage setting
P1 refers to the rated voltage setting option. Available values include: 36V and 48V. Press the button
to enter the
parameter modification interface. Press the button
/
for parameter selection. Press the button
to save the
parameter and return to the selection interface of general setting options.
