background image

Warranty

The warranty period from the date of purchase is as follows:

•    12 months on Yokota , Toku and Red Rooster tools;

•    3 months on spare parts of tools, which are repaired by us.

Warranty covers material or construction mistakes of the manufacturer, which are clearly definable. Replacement of parts or repair by an official Yokota/Red Rooster service workshop is free of
charge, when the tool is covered by warranty. Freight or postage is for the account of the buyer. Damage attributable to a normal wear, overloading or incorrect use is excluded from warranty.
Always consult this manual! Replacement of tools as a consequence of warranty claims is no part of the warranty arrangements.

Also claims for loss of production and/or other damages are excluded from this warranty.

Repairs under warranty can only be considered, when the tool is in its original state and it is accompanied by a copy of the purchase invoice. Warranty claims have to be made through the dealer,
who has supplied the tool concerned.

Declaration of Conformity

 

 ​​​​Declaration of Conformity​​​​​​

 Brand:       Yokota

 Product:     Impulse Wrenches​

 Type:           YZ-T950E

 Capacity:    40 - 60

 ​

WE, RAMI YOKOTA B.V. , hereby declare that this product

is conform the European Directive 2006/42/EG and, the standard EN ISO 11148-6

 

Technical file available from Rami Yokota BV:

RAMI YOKOTA BV

De Ruyterkade 120

1011 AB  Amsterdam

THE  NETHERLANDS

Date:    09-03-2020                       Place:   Amsterdam

Signature:

 

N. Nauta

Managing Director RAMI YOKOTA BV

 

Содержание YZ-T950E















Отзывы: