YS-e Instruction Manual 76-QD0444EN-00Y01-00.doc
6
・
If the electrolyte of the battery comes in contact with body part or clothes, rinse with a plenty of clean
water and seek medical attention. Failure to do so may result in dermal inflammation or injury.
1.4. Operation and Care
Warning
・
Use the electric tool within its capacity. Unreasonable use of the tool in overload could result in the
damage or failure of the tool.
・
Use the tool with proper tightening capability for the object to be tightened. If the capability is too big for
the object, the object may be broken or damaged and the broken pieces may cause injury. If the tool is
repelled when it is broken or damaged, your hand or arm may hit the surrounding object and you may
get injured.
・
Use the power tool for tightening of screws. Use for other purposes may cause accident.
・
If attachments for hand tools are used, there is a risk of breakage which may cause the accident such as
scattering of fragments. Therefore be sure to use attachments for power tools.
・
After installation of the attachment, pull it lightly and make sure that it does not come off. In case of
dropping in error or application of external force to power tool, check the installation condition of the
attachment again. Note that unsecure installation may cause damage on the attachment and/or early
malfunction of the product as well as accidents.
・
Use socket stoppers specified by Yokota or socket makers. Do not use wire, a nail and others as a
substitute for a socket stopper, which can cause serious accidents.
・
Use socket stoppers specified by Yokota or socket makers. Do not use wire, a nail and others as a
substitute for a socket stopper, which can cause serious accidents.
Do not use the bit or socket with large mass(heavy or long). Such mass may be transferred as the false
torque to the tool, which may cause the incorrect tightening.
・
Before operation, be sure to carry out precheck for the following. If you fail to do it, it may cause not only
degradation of performance or trouble but also danger.
・
No loosening or damage of screws for the tool
・
No problem on operation of throttle lever or reverse lever
・
No abrasion or damage on the accessary, etc.
・
Normal room/play for the connection between the tool and socket or between the tool and
battery pack, etc.
・
If the tool does not start or stop by the throttle operation, stop using the tool immediately.
Then ask repair and inspection to YOKOTA or YOKOTA-authorized or designated servicing factory via
the sales outlet or sales representative. If any accident or problem occurs due to the customer’s
intended action such as disassembly of this product, we shall not be liable for such trouble.
・
Avoid the use of the power tool by persons inexperienced for handling. Otherwise, it may result in injury
and/or accident.
