This tool is designed for tightening processes on threaded fasteners, if used otherwise a risk assessment has to be made by the employer/user.
This tool is designed for drilling in various materials using the available on the market, appropriate drill bits designed for these applications. If used
otherwise, like for example as mixer using special accessories a risk assessment has to be made by the employer/user.
This tool is designed for assembling, disassembling dowel pins using the original accessories. If used otherwise, or using not original accessories, a risk
assessment has to be made by the employer/user.
This tool is designed for grinding, polishing processes using the appropriate accessories as explained in this manual. If used otherwise a risk assessment
has to be made by the employer/user.
This tool is designed as a hammer, breaker using the appropriate chisels. If used otherwise a risk assessment has to be made by the employer/user.
This tool is designed for drilling in rock, concrete using the appropriate drill bits. If used otherwise a risk assessment has to be made by the
employer/user.
This tool is designed as a needle scaler for cleaning processes on steel, concrete and so on. If used otherwise a risk assessment has to be made by the
employer/user.
This tool is designed for cutting round materials, clamping processes. If used otherwise a risk assessment has to be made by the employer/user.
This tool designed for cutting various materials as steel, plastics, non ferro materials etc. If used otherwise a risk assessment has to be made by the
employer/user.
This tool is designed for reshaping the tips of spot weld machines. If used otherwise a risk assessment has to be made by the employer/user.
This tool is designed for clamping C rings in car seats etc. If used otherwise a risk assessment has to be made by the employer/user.
This tool is designed for engraving work on all kind of materials. If used otherwise a risk assessment has to be made by the employer/user.
This tool is designed to assemble pop rivets. If used otherwise a risk assessment has to be made by the employer/user.
This tool is designed for cutting the glue of car windows, sawing sheet metal or polishing. If used otherwise a risk assessment has to be made by the
employer/user.
This tool is designed as sump pump pumping various liquids. If used otherwise a risk assessment has to be made by the employer/user.
This tool is designed to pump various liquids from barrels. If used otherwise a risk assessment has to be made by the employer/user.
Warranty
The warranty period from the date of purchase is as follows:
• 12 months on Yokota , Toku and Red Rooster air tools;
• 3 months on spare parts of tools, which are repaired by us.
Warranty covers material or construction mistakes of the manufacturer, which are clearly definable. Replacement of parts or repair by an official
Yokota/Red Rooster service workshop is free of charge, when the tool is covered by warranty. Freight or postage is for the account of the buyer.
Damage attributable to a normal wear, overloading or incorrect use is excluded from warranty. Always consult this manual! Replacement of tools as a
consequence of warranty claims is no part of the warranty arrangements.
Also claims for loss of production and/or other damages are excluded from this warranty.
Repairs under warranty can only be considered, when the tool is in its original state and it is accompanied by a copy of the purchase invoice. Warranty
claims have to be made through the dealer, who has supplied the tool concerned.
