Yokota 6RD-4500H, Инструкция по эксплуатации

Страница: 23 / 40

-21-
■ Using the pneumatic drill for any applications other
than those specified could result in serious accidents.
To avoid that, be sure to thoroughly read this Instruc-
tion Manual and fully understand the instructions
before use to insure proper use.
■ Precautions before use:
● Use the pneumatic drill at operating air pressure
below 0.6MPa (dynamic air pressure with the gauge of
air piping at free speed).
Too high operating air pressure could result in damage to
this drill or accidents.
● Do not use the pneumatic drill in places with an
explosion hazard.
Do not use the pneumatic drill in places with flammable
gas, fluid, or powder or with an explosion hazard due to
heat generation by the drill.
● Before use, ensure that there is no underground
installation of conduits, gas pipes, or water pipes in
the work site.
If the drill comes in contact with such underground instal-
lation, accidents such as electric shocks or gas leakage
could result.
■ Precautions for use:
● Do not use gloves.
Using gloves could cause you to get caught in the drill.
It is imminently dangerous.
● Do not move your face or hand close to the rotating
part of the drill while in use.
Doing so could result in personal injury due to chips of the
drill.
WARNING
WARNING
This drill is a pneumatic tool designed to drill holes in iron sheets, alumi-
num sheets, sashes, etc.
Warnings and Cautions for Safe Use of Pneumatic Drill