6-2
<Maintenance>
IM 01W06D01-01EN
:RUNÀRZ
IMPORTANT
7KLVSURGXFWFRQWDLQVSDUWVWKDWFDQEHGDPDJHGE\VWDWLFHOHFWULFLW\
When replacing a battery, take precautions such as using a grounded
wrist strap to avoid handling electronic parts or touching the board
circuit patterns.
:KHQSXWWLQJRQRUUHPRYLQJWKH&DVHSD\JUHDWDWWHQWLRQWRWKH
environmental conditions to prevent dust and water droplets entering
the product.
7DNHVXI¿FLHQWFDUHQRWWRDSSO\H[FHVVLYHIRUFHWRWKHFLUFXLWERDUGKLW
WKHERDUGZLWKWRROVRUVWLFNIRUHLJQREMHFWVRUGLUWWRWKHERDUG
%HFDUHIXOQRWWRIRUFHWKHFDEOHWRVFUDWFKLWEUHDNLWRUSXOOLWRXWRIWKH
battery holder.
Follow the procedure below to replace the battery.
1. Loosen the case retaining screw (2 places) on the underside of the
XS110A.
5HPRYHWKHFDVHDQGERG\,ILWLVGLI¿FXOWWRRSHQWKHFDVHE\KDQGXVHD
ÀDWEODGHVFUHZGULYHUDVVKRZQLQ)LJ7KHFDVHFDQEHHDVLO\RSHQHG
by holding it in the groove between the case and the body and pushing it
upward.
3. While holding the top surface of the battery holder with your hand, loosen
WKHEDWWHU\KROGHU¿[LQJVFUHZSODFHVDOWHUQDWHO\
4. If the battery is stored, remove it by lifting the battery that is stored with the
battery holder.
5. Insert the new replacement battery into the battery holder with the positive
electrode facing up, as shown in Figure 6-3.
6. With the top of the battery holder held down by hand, alternately tighten the
EDWWHU\KROGHU¿[LQJVFUHZSODFHVZLWKDWRUTXHRI1āP
7. Put the case into the body without any gap.
7LJKWHQWKHFDVH¿[LQJVFUHZSODFHVRQWKHERWWRPRIWKH;6$WR¿[
WKHFDVHZLWKDWRUTXHRI1āP
,QLWLDOL]HWKHEDWWHU\OLIHXVLQJ6XVKL6HQVRU$SS)RUGHWDLOVDERXWKRZWR
LQLWLDOL]HWKHEDWWHU\OLIHUHIHUWR³,0:((1´
