YOKOGAWA UT35A-L, Руководство пользователя

Страница: 47 / 150

6-2
IM 05P04D41-01EN
Details of the Operation Display
The following is the Operation Display types and each display and operation description.
PV display
Setpoint display
Operation Display Display and operation description
SP Display
PV display: Displays measured input value (PV).
Setpoint display: Displays and changes target setpoint (SP).
Symbol Target setpoint
[SP Change Operation]
(1) Press the SET/ENTER key to move to the setting mode (the setpoint
blinks).
(2) Use the Left or Right arrow key to move between digits (the setpoint
blinks).
(3) Use the UP or Down arrow key to change the value (the setpoint
blinks).
(4) Press the SET/ENTER key to register the setpoint. (the setpoint stops
blinking).
* Only Up or Down arrow key operation is also possible.
Duration Time
Display
PV display: Displays measured input value (PV).
Setpoint display: Displays duration time.
The time while PV exceeds SP is counted and stored in
the memory. It is displayed in the “TIME” display in the
confirmation display.
Duration time
Symbol
Display time range: 0.00 to 99.59
Unit of time is be either “hour.minute” or “minute.second”, and can be set
by operation parameter TMU.
6.1 Monitoring and Control of Operation Displays