YOKOGAWA UP35A, Руководство пользователя

Страница: 69 / 412

6-8
IM 05P02D41-01EN
6.1.2 Details of the Operation Display
The following is the Operation Display types and each display and operation description.
PV display
Setpoint display
Operation Display Display and operation description
SP Display
PV display: Displays measured input value (PV).
Setpoint display: Displays and changes target setpoint (SP).
Symbol
Program setpoint
Program pattern number (PTNO.)
The Display is switched to the SP Display if the operation mode is
switched to AUTO or LOC when other Operation Display is shown.
When the operation mode is reset (SSP lamp is lit):
Starting target setpoint Symbol
Program pattern number (PTNO.)
When the operation mode is local (L.SP lamp is lit):
Local setpoint Symbol
Program pattern number (PTNO.)
The figure below is displayed while the right arrow key is held down on
SP Display.
Program setpoint
The number of segments included
in the selected program pattern.
The segment number for which
operation is in progress.
Program pattern number (PTNO.)
6.1 Monitoring and Control of Operation Displays