YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 82

Страница: 82 / 589

2-51

IM 701240-01E

App

Index

Explanation of Functions

Saving and Loading Setup Data, Waveform Data, and Snapshot Waveform

Data

The setup data, waveform data, and snapshot waveform data can be saved to or loaded

from a specified storage medium.

Saving the Results of the Automated Measurement of Waveform

Parameters

The automated measured values of waveform parameters can be stored to a specified

storage medium.

Creating a PDF File of the Print Image «For procedures, see section 13.14.»

By setting the output destination in the PRINT menu to “PDF,” a PDF file of the print

image (image similar to fine print (see section 12.1)) can be created. A print image of the

specified range and magnification is created to the specified file name on the specified

storage medium simply by pressing the PRINT key.

Operating the SL1400 Using a Free Software Program

The SL1400 can be controlled from a PC using Wirepuller, a free software program,

when connected via the GP-IB, USB, or Ethernet interface. To download the software

program, go to the following website, and then browse to the download page.

• English version

http://www.yokogawa.com/ymi/

• Japanese version

http://www.yokogawa.com/jp-ymi/

Connecting the SL1400 and the PC via the SCSI «For procedures, see section 13.19.»

You can connect a PC to the SCSI of the SL1400 and download the files on the internal

hard disk (option) to the PC.

You cannot upload or delete files on the internal hard disk. If you do, the internal hard

disk may become unusable.

The following limitations exist.

While connected to the PC, the File List window of the SL1400 may not be displayed

properly. If the connected PC enters sleep, standby, or rest mode, the SL1400 will not be

able to access its internal hard disk. Before connecting the PC to the SL1400, disable

such modes on the PC.

2.9 Other Useful Functions

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя

Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды