5. CHANGING SETTINGS
IM 2493WVP-1
12
When you reach the Average setting, press Set and the first digit will begin
blinking.
To increment the value of the digit, press Inc. Once a digit has reached 9 (nine),
it will then go to 0 (zero). To move to the second digit press Next. To return to
the first digit press Next again. When you have set the desired value, press Set.
Both digits will blink, showing you are now in Confirm mode. If the value is
correct press Set one more time to save the value and move on to the Address
setting. Pressing Mode at any time before this will restore the old setting.
The average can be set to any value from 0 to 29.
Changing the Network Address setting
The Address setting is changed in exactly the same way as the Average setting.
The address can be set to any value from 01 to 32. NOTE - Please make sure
that no two units have the same address. After saving the value you will move to
the Baud Rate setting.
Changing the Baud Rate setting
When you reach the setting, press Set and the whole value will begin blinking.
To change it to the next choice, press Inc. You can scroll through all the choices
with the Inc key. Those choices are 9600 (default), 4800, 2400 and 1200. When
you have reached the desired choice, press Set. The new setting will be saved
and the unit will proceed to the next mode.
