5. CHANGING SETTINGS
IM 2493AAA-1
10
Changing the network address setting
The Address setting is changed in exactly the same way as the Average setting.
The address can be set to any value from 01 to 32. Please make sure that no
two units have the same address. If this occurs neither unit will be able to
communicate.
After saving the value you will move to the Baud Rate setting.
Changing the baud rate setting
When you reach the setting, press Set and the whole value will begin blinking.
To change it to the next choice, press Inc. You can scroll through all the choices
with the Inc key. Those choices are 9600 (default), 4800, 2400 and 1200. When
you have reached the desired choice, press Set. The new setting will be saved
and the unit will proceed to the next mode.
