<PG400 Pulse Generator for Clean Unit>
7
IM 19C01B05-01EN
2nd Edition : Jul. 06, 2021-00
Accessories
Name
Q’ ty
Remarks
Cable gland
3 pieces
1 rubber plug is attached.(Part No. of the set K8008EN)
Plate
1 piece
For cable gland connection (Part No. K8008ET)
Option Mounting bracket
1 set
Option / UM, /U, /U1, /PM, /PM1
Hood
1 set
Option /H6, /H7
Stainless steel tag plate
1 set
Option /SCT, tag plate, wire.
Tag plate
1 sheet
Other than /SCT, TAG No.is specified
Conduit adapter setting
1 set (2 pack/1 set)
Option /CB, /CD, /CF
User’s Manual
1 book
(This manual)
Oscillator cable, Power cable for the turbidity detector TB820D, TB810D
Required for connection to the turbidity detector TB820D, TB810D.
The Power cable is required along with the oscillator cable. Please prepare cables of the same length.
Cable Length
Oscillator cable
Part No.
Power cable
Part No.
1 m
K8008AW
K8008BW
5 m
K8008AX
K8008BX
10 m
K8008AY
K8008BY
15 m
K8008AZ
K8008BZ
Option parts
Name
Part No.
Remarks
Rubber plug
K9703ZN
for cable gland
Fuse
A1109EF
250V/1.0A (minimum 5 pcs)
Conduit
adapter
G1/2
K8008GF
for Option code /CB
1/2NPT
K8008GG for Option code /CD
M20×1.5
K8008GH for Option code /CF
Hardware Pipe and wall mounting
hardware
K9703SS
same as Option code /U
Panel mounting hardware
K9703ZD
same as Option code /PM
Wall mounting hardware for
replace
K8008GN same as Option code /U1
Panel mounting hardware
for replace
K8008GA same as Option code /PM1
Hood
Stainless steel
K9698WK same as Option code /H6
Stainless steel with
urethane coating
K9698WL same as Option code /H7
n
Names and description
Power cable inlet
Oscillator cable inlet
POWER LED
OUTPUT LED
Volume
Front view
When Front cover is open
When Front cover is open and Protect cover is removed.
OUTPUT switch
Plate
(Not used)
LED Display
Power terminal (L, N) Output terminal (U1, U2, U3)
Shield terminal (S)
Front cover
Protect cover
Fuse case
Ground terminal
Figure 1 PG400 Parts names
