YOKOGAWA HANDY CAL CA51, Руководство пользователя

Страница: 62 / 108

IM CA71-E
6-1
Memory Functions
6
6. Memory Functions
The built-in memory has the following four functions. With a pair of
sourced and measured signal values in a set, the calibrator can handle
a maximum of 50 sets of data (hereinafter simply referred to as data) by
means of its built-in memory.
1. Saving to Memory (MEM SAVE)
You can save data to memory.
2. Reading from Memory (MEM READ)
You can show data in memory on the LCD. When data is being read
from memory, the source output remains turned off. Thus, you cannot
do any source task using data stored in memory.
3. Clearing Memory (MEM CLEAR)
You can clear data stored in memory.
4. Sending Data from Memory - CA71 only -
You can send data in memory to an external personal computer using
the communication function. This function requires use of the optional
RS232 communication cable (P/N: 91017). For further details, see
Chapter 8, "Communication Function."
Keys and labels related to memory function