YOKOGAWA DX Series Скачать руководство пользователя страница 7

Страница: 7 / 56

Yokogawa DX Serial Driver

Note

: With the server's online full-time operation, these properties can be changed at any time. Utilize

the User Manager to restrict access rights to server features, as changes made to these properties can
temporarily disrupt communications.

Connection Type

Physical Medium

: Choose the type of hardware device for data communications. Options include COM

Port, None, Modem, and Ethernet Encapsulation. The default is COM Port.

None

: Select None to indicate there is no physical connection, which displays the

Operation with no

Communications

section.

COM Port

: Select Com Port to display and configure the

Serial Port Settings

section.

Modem

: Select Modem if phone lines are used for communications, which are configured in the

Modem Settings

section.

Ethernet Encap.

: Select if Ethernet Encapsulation is used for communications, which displays the

Ethernet Settings

section.

Shared

: Verify the connection is correctly identified as sharing the current configuration with another

channel. This is a read-only property.

Serial Port Settings

COM ID

: Specify the Communications ID to be used when communicating with devices assigned to the

channel. The valid range is 1 to 9991 to 16. The default is 1.

Baud Rate

: Specify the baud rate to be used to configure the selected communications port.

Data Bits

: Specify the number of data bits per data word. Options include 5, 6, 7, or 8.

Parity

: Specify the type of parity for the data. Options include Odd, Even, or None.

Stop Bits

: Specify the number of stop bits per data word. Options include 1 or 2.

Flow Control

: Select how the RTS and DTR control lines are utilized. Flow control is required to communicate

with some serial devices. Options are:

www. ptc.com

Содержание DX Series
























































Результаты поиска

Содержание DX Series

Отзывы:

YOKOGAWA DX Series, Руководство пользователя, Страница: 7 / 56

Результаты поиска

Содержание DX Series

Отзывы: