YOKOGAWA DpharpEJX vigilantplant EJX210A, Руководство пользователя

Страница: 50 / 54

IM 01C25C01-01E 9-11
9. GENERAL SPECIFICATIONS
T0912.EPS
Code
Description Item
P
Amplifier cover only
Painting
PR
Amplifier cover and terminal cover, Munsell 7.5 R4/14
Color change
X2
Anti-corrosion coating * 1 Coating change
K1 Degrease cleansing treatment
Oil-prohibited use
AL
Transistor output (open drain: sink type)
Contact rating: 10.5 to 30 V DC, 120 mA DC (max) Low level: 0 to 2 V DC
Status output * 13
D1 P calibration (psi unit)
Calibration units
*
3
D3 bar calibration (bar unit)
(See table for Span and
Range Limits.)
D4 M calibration (kgf/cm
2
unit)
TF1
Diaphragm protection from sticky process fluid by FEP Teflon film attached with fluorinated oil.
Operation range: 20 to 150
°
C, 0 to 2 MPa (Not applicable for vacuum service).
Teflon film
* 2 * 12
C1
Failure alarm down-scale : Output status at CPU failure and hardware error is 5%,
3.2 mA DC or less.
Output limits
and failure operation
*
4
C2
Failure alarm down-scale : Output status at CPU
failure and hardware error is
5%, 3.2 mA DC or less.
C3
Failure alarm up-scale : Output status at CPU
failure and hardware error is 110%, 21.6 mA or more.
NAMUR NE43 Compliant
Output signal limits : 3.8 mA to
20.5 mA
A1 Inside of isolating diaphragms (fill fluid side) are gold plated, effective for hydrogen permeation. Gold-plate
* 5
N4 304SST tag plate wired onto transmitter Stainless steel tag plate
CA Data configuration for HART communication type Data configuration at
factory
*
6
CB Data configuration for BRAIN communication type
Material
certificate
For Flush
type
M0W High Pressure side: Process flange, Block
* 7
Low Pressure side: Cover flange
M1W High Pressure side: Process flange, Block * 8 Low Pressure side: Cover flange, Process connector
M3W
High Pressure side: Process flange, Block, Ring
* 7 * 9
Low Pressure side: Cover flange
M4W
High Pressure side: Process flange, Block, Ring
* 8 * 9
Low Pressure side: Cover flange, Process connector
M0E
High Pressure side: Process flange, Block, Pipe, Base
* 7
Low Pressure side: Cover flange
M1E
High Pressure side: Process flange, Block, Pipe, Base * 8
Low Pressure side: Cover flange, Process connector
For Extended
type
(Flange rating) (Test pressure)
Pressure test/Leak test
Certificate
*
14
T51 JIS 10K 2 MPa (290psi)
T54 JIS 20K 5 MPa (720 psi)
T52 ANSI/JPI Class 150 3 MPa (430 psi)
T56 ANSI/JPI Class 300 8 MPa (1160 psi)
* 2
T55 ANSI/JPI Class 300 7 MPa (1000 psi)
* 10
Nitrogen (N
2
) Gas * 11
Retention time: 10 minutes
K2
Degrease cleansing treatment and with fluorinated oil filled capsule.
Operating temperature
20 to 80 C
K5 Degrease cleansing treatment and dehydrating treatment
Oil-prohibited use
with dehydrating treatment K6
Degrease cleansing treatment and dehydrating treatment with fluorinated oil filled capsule.
Operating temperature
20 to 80 C
A
Transmitter power supply voltage: 10.5 to 32 V DC ( 10.5 to 30 V DC for intrinsically safe type.)
Allowable current: Max. 6000 A ( 1
40 s ), Repeating 1000 A ( 1 40 s ) 100 times
Applicable Standards: IEC 61000-4-4, IEC 61000-4-5
Lightning protector
Software damping, Descriptor, Message
Software damping
* 1: Not applicable with color change option.
* 2: Applicable for flush type (process connection style code W .)
*
3: The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option code
D1
,
D3
, and
D4
.
*
4: Applicable for output signal code D and E. The hardware error indicates faulty amplifier or capsule.
* 5: Applicable for wetted parts material code SW , SE , WW , WE , and HW .
Consult Yokogawa in case gold-plated diaphragm is required for low pressure side.
*
6: Also see ‘Ordering Information.’
*
7: Applicable for Low Pressure Side Process connection code
0
and
5
.
* 8: Applicable for Low Pressure Side Process connection code 1 , 2 , 3 , and 4 .
* 9: Applicable for flushing connection ring code A , B , C , and D .
*
10: Applicable for extended type (process connection style code
E
.)
*
11: Pure nitrogen gas is used for oil-prohibited use (option code
K1
,
2K
,
K5
, and
K6
.)
* 12: Applicable for flushing connection ring code 0 .
* 13: Check terminals cannot be used when this option is specified. Not applicable for output signal code F and amplifier housing code 2 .
*
14: The unit on the certificate is always MPa regardless of selection of option code
D1
,
D3
, or
D4
.