IM 01C21C01-01E
8-5
8. BRAIN TERMINAL BT200 OPERATION
T0806.EPS
Auxiliary setting data 1
D
Menu name
AUX SET 1
—
NORMAL/REVERSE
NORMAL/REVERSE
Output reversal
D40 REV OUTPUT
Impulse piping
accessing direction
D45 H/L SWAP
—
HIGH/LOW, –5 to 110%*
3
CPU error
D52 BURN OUT
deg C/deg F
Temperature setting
units
D30 TEMP UNIT
Selected from mmH
2
O, mmAq,
mmWG, mmHg, Torr, Pa, hPa, kPa,
MPa, mbar, bar, gf/cm
2
, kgf/cm
2
,
inH
2
O, inHg, ftH
2
O, psi, or atm
Static pressure setting
units
D31 STAT. P. UNIT
Hardware error
D53
Same as A60
HOLD/HIGH/LOW, –5 to 110%*
3
ERROR OUT
Self-diagnostic
messages
—
D60 SELF CHECK
Auxiliary setting data 2
E
OFF/ON
Menu name
AUX SET 2
Bidirectional mode
E30 BI DIRE
MODE
Same as A60
Self-diagnostic
messages
E60 SELF CHECK
—
—
No.
Description
Remarks
Item
Menu name
Automatic setup
H
AUTO SET
—
Adjustment data
J
–5 to 110.0%*
3
Menu name
ADJUST
Automatic zero
adjustment
J10 ZERO ADJ
—
—
—
—
—
—
—
—
—
Manual zero
adjustment
J11 ZERO DEV.
ENABLE/INHIBIT
External zero-
adjustment screw
permission
J20 EXT. ZERO
ADJ
Same as A60
Self-diagnostic
messages
J60 SELF CHECK
Display the error
History of the errors
RECORD
Last error
P10
P11
ERROR REC 1
Display the error
One time before
ERROR REC 2
P12
Display the error
Two time before
ERROR REC 3
Menu name
Tests
K
TEST
–5 to 110.0%*
3
Displays ‘ACTIVE’
while executing
Test output % setting
K10 OUTPUT in %
Same as A60
Self-diagnostic
messages
K60 SELF CHECK
Menu name
Memo
M
P
MEMO
8 uppercase alphanumerics
Memo
M10 MEMO 1
8 uppercase alphanumerics
Memo
M20 MEMO 2
8 uppercase alphanumerics
P13
Display the error
Three time before
ERROR REC 4
P60
Same as A60
Self-diagnostic
messages
SELF CHECK
Memo
M30 MEMO 3
8 uppercase alphanumerics
Memo
M40 MEMO 4
8 uppercase alphanumerics
Memo
M50 MEMO 5
Same as A60
Self-diagnostic
messages
M60 SELF CHECK
–32000 to 32000
Automatic measure-
ment range lower
range value setup
H10 AUTO LRV
–32000 to 32000
Automatic
measurement range
higher range value
setup
H11 AUTO HRV
—
—
—
—
—
Same as A60
Self-diagnostic
messages
H60 SELF CHECK
Applica-
bility
P L
F
deg C
As specified when ordered.
If not specified, MPa.
If not specified, NORMAL.
NORMAL
HIGH
HIGH
OFF
Displays the same data as
C21.
Displays the same data as
C22.
Rewrita-
bility
Default Value
*1: In case of Model EJA120A, static pressure cannot be measured. The display is always 0 MPa, but this is not a measured value.
*2: When Optional code /F1 is specified, substitute the value with 0.1.
*3: When Optional code /F1 is specified, substitute the value –5 with –2.5.
*4:
See MWP(max. working pressure) on the nameplate. B40 shows an approximate value of maximum pressure for the capsule.
