YOKOGAWA DOX8HS, Руководство пользователя, Страница: 21 / 32

< 3. Installation, Piping and Wiring >
3-3
IM 19H1D2-01E
3.2.2 Inserting the Mounting Bracket
The submersion type holder is used attached to 2-inch pipe (outer diameter 60.5 mm). Pipe
mounting brackets (see Figure 1.4 ) are supplied when specified and should be used in the
installation.
As a rule, one set of brackets is provided for a 1.0 m holder and 2 sets for a 1.5 m long or more
holder. Figure 3.3 shows a schematic diagram indicating the mounting positions. Make the
necessary adjustments if it is not possible to mount the brackets at the locations indicated in
Figure 3.3.
Unit : mm
Holder without washing device
Holder with jet washing device
Approx. 250
Approx. 70
950 or more
When two mounting bracket sets
are provided.
When two mounting bracket sets
are provided.
950 or more
Figure 3.3 Locations of Mounting Brackets (reference)