ix
IM DM7560-02EN
Confirm that there is no dust on the power plug, and then insert it securely into the
receptacle. In addition, every six months to a year, remove the power plug and the
power adapter from the receptacle and check and clean them.
Dust may result in electrical shock, fire, or malfunction.
Metal objects and the like must not touch the power plug blades.
This may cause electric shock, fire, or malfunction.
Put the power switch in the OFF position before connecting or disconnecting the power
cord.
Connecting or disconnecting the power cord while the power switch is ON may result in
electric shock or malfunction.
When disconnecting the power cord from the receptacle, hold the plug to pull it out.
Pulling the power cord may result in electric shock or fire.
When the power cord or test lead is connected to this instrument, be careful not to
topple this instrument by pulling on the cord or test lead.
Toppling this instrument may result in electric shock, injury, or fire.
Do not use a damaged power cord, test lead, or adapter.
Using a damaged power cord, test lead, or adapter may result in electric shock, fire, or
malfunction.
Do not use multiple-connection outlets.
Power strips and other multiple-connection outlets may cause fire or overheating.
Do not place containers of water or chemicals, small metal objects, and the like near
this instrument.
If the contents are spilled and enter the instrument, it may cause electric shock, fire, or
malfunction. If water, chemicals, or metal objects enter the instrument, set the power switch to
the OFF position (the state of “O”; The switch is convex), and remove the plug from the outlet,
and then contact your nearest YOKOGAWA dealer for repair
Do not place this instrument in an area where frequent vibrations or impacts occur.
If this instrument is dropped or overturned, it may cause a physical injury or malfunction.
Before transporting this instrument, remove all devices under testing, probes, and
cables, and then grasp the center of the unit with both hands and carry it carefully to
avoid dropping.
If this instrument is dropped, it may result in a physical injury or property damage.
Do not stack anything on top of this instrument.
Doing so will cause the cover to come into contact with the internal circuitry, which may result
in electric shock, fire, or malfunction.
Do not place this instrument under direct sunlight or a location where humidity is high.
Doing so will cause the internal temperature rise and may lead to a fire.
Use a specified fuse (accessory: ratings 3 A and 250 V) when you exchange fuses.
Never use a fuse with different ratings.
Doing so may cause a fire or malfunction.
If you use up the accessory fuse or lose it, contact your nearest YOKOGAWA dealer.
Do not use or store this instrument in a location that is humid (bathroom, etc.) or dusty.
Placing it in a humid or dusty location may cause an electric shock, fire, or malfunction.
Do not place this instrument next to a worktable or humidifier, where it may be exposed
to oily smoke or steam.
Doing so may cause an electric shock, fire, or malfunction.
Safety Precautions
