App-2
IM 701310-17E
Appendix 2 Error Messages
This section describes the error messages related to communications.
• The messages can be displayed in English or Japanese on the DL9000. However,
when the messages are read from a PC or other similar computers, the messages are
displayed in English.
• If servicing is required, contact your nearest YOKOGAWA dealer for repairs.
• Only error messages related to communications are listed here. For other error
messages, see
User’s Manual IM 701310-01E
.
· Communication syntax error
· Communication execution error
· Model specific (other)
· Communication query error
· System error (communications)
100~199
200~299
300~398
400~499
399
Details given below.
Error in Communication Command (100-199)
Code
Messages
Corrective Action
Reference Page
102
Syntax error.
Invalid syntax.
Chapter 4, 5
103
Invalid separator.
Use a comma to separate the data.
4-1
104
Data type error.
Write using the correct data form.
4-6 to 4-7
105
GET not allowed.
GET is not supported for responses to interface messages. 3-6
108
Parameter not allowed.
Check the number of data points.
4-6, Chapter 5
109
Missing parameter.
Enter the required data.
4-6, Chapter 5
111
Header separator error.
Use a space to separate the header and data.
4-1
112
Program mnemonic too long.
Check the mnemonic (alphanumerical character string).
Chapter 5
113
Undefined header.
Check the header.
4-4, Chapter 5
114
Header suffix out of range.
Check the header.
4-4, Chapter 5
120
Numeric data error.
A number is required in the <NRf> form.
4-6
123
Exponent too large.
Use a smaller exponent for <NR3> format.
4-6, Chapter 5
124
Too many digits.
The value must be less than equal to 255 digits.
4-6, Chapter 5
128
Numeric data not allowed.
Enter in a format other than <NRf> format.
4-6, Chapter 5
131
Invalid suffix.
Check the unit of the <Voltage>, <Time>, <Frequency>, and
<Current>.
4-6
134
Suffix too long.
Check the unit of the <Voltage>, <Time>, <Frequency>, and
<Current>.
4-6
138
Suffix not allowed.
No units are allowed other than <Voltage>, <Time>,
<Frequency>, and <Current>.
4-6
141
Invalid character data.
Select character data from the selections available in
{...|...|...}.
4-7, Chapter 5
144
Character data too long.
Check the spelling of the character strings in {...|...|...}.
4-7, Chapter 5
148
Character data not allowed.
Write in a data form other than {...|...|...}.
4-5, Chapter 5
150
String data error.
Enclose <String> in double quotation or single quotation
marks.
4-7
151
Invalid string data.
<String> is too long or contains characters which cannot be
used.
4-7, Chapter 5
158
String data not allowed.
Enter in a data format other than <Character string>.
4-6, Chapter 5
161
Invalid block data.
<Block data> is not allowed.
4-7, Chapter 5
168
Block data not allowed.
<Block data> is not allowed.
4-7, Chapter 5
171
Invalid expression.
Equations cannot be used.
Chapter 5
178
Expression data not allowed.
Equations cannot be used.
Chapter 5
