＜
Toc
＞
＜
Ind
＞
60
All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation
TI 04L01A01-02E
4.2
Batch Function (/BT1)
The batch function option is used to add batch numbers and comments to the batch files.
The batch information is written to the header section of the measurement data file. The batch information
can be viewed along with the measured data on a PC and output to a printer by using the viewer of
DAQEXPLORER(option).
Application name
: Up to 16 alphanumeric characters
Batch name
: Batch Lot number
Batch number Number of characters : Up to 16 alphanumeric characters
Lot number
Number of digits : Up to four digits
Auto increment
:Lot numbers isincrease automatically
at every batch start.
Comments
Number of lines
: three lines
Number of characters
: Up to 32 alphanumeric characters per line
User name
: Up to 16 alphanumeric characters
Manager name
: Up to 16 alphanumeric characters
Supervisor name
: Up to 16 alphanumeric characters
■
Configuration and input of batch information by communication.
Manager name, supervisor name, application name, batch name, and comment can be set by using
communication.
■
Batch name display
Current time and batch name are changed every 5 seconds.
①
Log in user name
②
Display group
③
Current date and time
Log on status
Log off or
not use key log in
