YOKOGAWA CL150, Руководство пользователя

Страница: 19 / 21

14
IM CL150
●
Safety Standard: EN 61010-1, EN 61010-2-033
EN 61010-031, EN 61010-2-032
AC/DC 600V CAT III, AC/DC 1000V CAT II,
Pollution degree2, indoor use, altitude 2000m or less
●
EMC Standard : EN 61326-1, EN 61326-2-1
● Radiation immunity : EN 61000-4-3
●
Environmental standard : EN 50581
● Accessories : Test leads Model 98072 ………… 1set
R6P batteries
………………………
2
Carrying case Model 93034 …… 1
User s Manual
………………………
1
● Optional Accessories : Output cable Model 98076
Output cable (for terminal screw) Model 98077
6. Calibration and After-sales Service
Should any failure occur while you are using the tester, follow the instructions
given below. If the tester still fails to operate correctly and needs repair, contact
the vendor from whom you purchased the instrument or the nearest Yokogawa
Meters & Instruments sales office.
● Turn off the POWER switch once, then turn it back on again.
●
If the tester does not turn on, replace the battery with a new one.
Calibration
It is recommended that the instrument be calibrated once every year.