2. Transportation, Storage and Installation
2-15
TI 33Q01J10-01E
2.5.2
Installing the Console Type HIS Side-by-Side
LPCKIT
The way to mount two or more console type HIS side by side, using bolts to join them, is
described below. The same method is used to join universal consoles or CENTUM-XL cabinets
with the same shape.
IMPORTANT
The CENTUM-XL EOPS has a different-shaped operation keyboard than the console type HIS,
so you can’t use the EOPS flat membrane keyboard if you want to mount EOPS and console
type HIS side by side.
A
B
C
D
E
F
G
F020417.ai
Front door below desk
Channel base
Desk
LCD
Figure Example of side-by-side mounting of Console Type HIS
Installation
(a) Level the floor surface on which cabinets are to be installed.
(b) To install two or more cabinets in a line, install the central one first (D in Figure), and next
ones on both sides (C→B→A, E→F→G).
(c) With bottom plate (see Figure on next page) off, install the cabinet in position, making sure
that the anchor bolt position and channel base hole align with each other.
(d) Tighten anchor bolt nut (a) (see Figure on next page) when the installation is complete.
When linking many cabinets in a row, tighten the nuts only finger-tight first, fully tightening
them when the cabinet interconnection is complete.
May 18, 2007-00
