YOKOGAWA AQ1301 Скачать руководство пользователя страница 71

Страница: 71 / 380

2-5

IM AQ1300-01EN

Screen Explanations

App

Index

Measurement Indication

“Measuring” appears while measurement is being performed.

Measurement Duration Indication

The measurement duration is indicated in the following format: hh:mm:ss.

Transmission and Reception Rates

During measurement, the transmission and reception rates are indicated (as percentages).

Normal Frames

The number of normal frames that have been sent and received during the measurement period is

indicated.

Received Frame Length

The average frame length of the frames that have been received during measurement is indicated.

Error History

During measurement, link errors, L2 errors (L2 frame errors), and L3 errors (payload errors,

sequence errors, etc.) are detected and displayed.

Display Item

Indication

Description

LINK

LINK (gray)

No linkdowns have been detected during measurement.

LINK (red)

If even one linkdown is detected during measurement, the indication

becomes red and display the number of detected errors. “over” is

displayed when the number of detected errors exceeds 999.

L2 (gray)

During measurement, no frames have been received with any of the

following errors.

• CRC errors

• Undersize errors

• Oversize errors

• Symbol errors

• Alignment errors

L2 (red)

During measurement, if even one frame is received with any of the

following errors, the indication becomes red and display the number

of detected errors. “over” is displayed when the number of detected

errors exceeds 999.

• CRC errors

• Undersize errors

• Oversize errors

• Symbol errors

• Alignment errors

L3 (gray)

During measurement, no frames have been received with any of the

following errors.

• Bit errors

• Sequence errors

• Payload errors

L3 (red)

During measurement, if even one frame is received with any of the

following errors, the indication becomes red and display the number

of detected errors. “over” is displayed when the number of detected

errors exceeds 999.

• Bit errors

• Sequence errors

• Payload errors

The number of detected errors is cleared when:

•  Measurement is started
•  Setup data is loaded
•  You log in to the AQ1300/AQ1301

Test-Mode-Specific Items

Different measurement items are displayed for different test modes. For details, see section 2.2.

2.1 Measurement Screens (Common Items)

Содержание AQ1301





























































































































































































































































































































































































Результаты поиска

Содержание AQ1301

Отзывы:

Похожие инструкции для AQ1301

Бренды по названию

Популярные бренды

YOKOGAWA AQ1301, Руководство пользователя

Результаты поиска

Содержание AQ1301

Отзывы:

Похожие инструкции для AQ1301

Бренды по названию

Популярные бренды