18-10
IM AQ1200-01EN
18.4 Changing File Names
CAUTION
Do not remove USB memory or turn off the power when the USB memory access indicator is
blinking or when data is being saved or loaded from internal memory. Doing so may damage
the storage medium (USB memory or internal memory) or corrupt its data.
French
ATTENTION
N'enlevez pas un dispositif de mémoire USB et ne coupez pas l'alimentation électrique
lorsque l'indicateur d'accès à la mémoire USB clignote ou lorsque les données sont en train
d'être enregistrées ou chargées à partir d'une mémoire interne. Vous risqueriez
d'endommager le support de stockage (mémoire USB ou mémoire interne) ou les données
qu'il contient.
Procedure
File Operation Screen
Press
SETUP
and the
File
soft key. Or, press
SETUP
twice. The following screen appears.
Set the action (Rename).
Set the file type.
Set the extension of the file type of the file
whose name you want to change.
Set the destination drive (internal
memory, USB memory).
Enter a new file name.
The character input dialog box appears.
To set the file name, follow the procedure in
section 2.4. Enter the extension as well.
After you have entered the file name, press
the
Commit
soft key to change the file
name to the name that you entered.
Folder path
The number of folders and files in the selected folder
Using the
rotary knob
and
ENTER
, select
the file whose name you want to change.
Selected files are indicated with this mark: .
To deselect a file, press
ENTER
again.
