YOKOGAWA AF220, Примечание к применению

Страница: 1 / 22

www.cypress.com
Document No. 002-05108 Rev. *B 1
AN205108
F²MC-16LX Family, Flash Programmer Yokogawa AF220/221
This application note describes the set up and using of the third party Flash-Programmer
“Yokogawa AF220/AF221”.
Contents
1 Introduction ............................................................... 1
1.1 Programmer overview ...................................... 2
1.2 System overview .............................................. 3
1.3 Serial Interface Cable ...................................... 4
1.4 ................................................................................ 5
1.5 Target Probe .................................................... 5
2 Hardware Set-up ...................................................... 9
2.1 Hardware Configuration ................................... 9
3 Stand-alone operation ............................................ 11
4 Software
– Remote Controller AZ290 ..................... 12
4.1 Parameter Load ............................................. 12
4.2 File transfer to PC-card .................................. 12
5 Software
– Remote Controller Library AZ291 ......... 15
6 External Key Entry Interface AZ233 ....................... 16
7 Pass/Error Adapter AZ266 ..................................... 17
8 Part List .................................................................. 18
9 Contact Addresses ................................................. 19
9.1 Hitex Development Tools GmbH ................... 19
9.2 AK Elektronik Vertriebs GmbH ...................... 19
9.3 Ashling Microsystems LTD. ........................... 19
9.4 Yokogawa Digital Computer Corporation ....... 19
10 Appendix ................................................................ 20
10.1 Time Measurement ........................................ 20
11 Document History ................................................... 21
1 Introduction
This application note describes the set up and using of the third party Flash-
Programmer “Yokogawa AF220/AF221”.
The programmer allows in-circuit programming of Cypress microcontrollers using the serial-synchronous interface.
The Yokogawa AF220/AF221 can be adapted to different target controller types by changing the control-module (PC-
card). With the FF201 module near all Cypress microcontrollers of the 16LX-series can be programmed. The FF205
module supports the MB91F150-family (32-Bit), the FF206 module has to be used together with MB91F360-family
(32-Bit).
It can be used as stand-alone system as well as a PC-controlled programmer using the RS-232C or the Ethernet
interface.
The optional software package AZ290 allows to program remotely control application software created at customers'
sites.
User information and system settings can be stored on the PC-card.