2-5
IM 765501-01E
Explanation
of
Functions
3
2
1
6
5
4
9
8
7
12
11
10
15
14
13
18
17
16
Index
App
2.3
Source
Source Function
(See section 5.1 for the procedure)
You can select voltage source (VS) or current source (IS).
Source Range
The GS610 generates voltage or current in the range specified by the hatched lines in
the figure below. The performance limitations of the GS610 place constraints on the
current and voltage when generating voltage and current, respectively. For example, the
voltage is limited to 30 V or less when 1.5 A is specified when generating current. If the
voltage or current source level is at the boundary of the source range and is limited, a
high limiter indicator (H) illuminates if the level is positive and a low limiter indicator (L)
illuminates if the level is negative.
3.2
2
1
0.5
12
30
60 110
I
V
Limiter
(See section 5.3 for the procedure)
CAUTION
If a load exceeding the source range above is connected such as a current
source exceeding the current limiter setting when generating voltage or a
voltage source exceeding the voltage limiter setting when generating current,
abnormal load is detected, and the output is turned OFF. Do not connect a load
exceeding the range above to the GS610. Doing so may cause malfunction.
French
ATTENTION
Si vous raccordez une source de courant en mode source de tension dépassant
le paramètre du limiteur de courant, ou une source de tension en mode source
de courant dépassant le paramètre du limiteur de tension, ou encore une charge
dépassant la plage de la source ci-dessus, une charge anormale est détectée et
la sortie est mise hors tension. Ne connectez pas ces types de charge au
GS610, ce dernier risquerait de ne pas fonctionner correctement.
