1-4
IM 701931-01E
Measurement Procedure
Notes on Use
WARNING
Connection with Power Supply
Connect the power supply to the probe power supply terminal of a
waveform measuring instrument such as YOKOGAWA DL/DLM series, or
use the Power Supply (Model 701934).
Connecting the Probe to the Item under Test
• If you need to touch the circuit with your hand, first cut the power to the
circuit and confirm that it is not carrying any voltage.
• To avoid short circuits and personal injury when the clamp is open or
measurement is being performed, do not apply the clamp to any bare
conductors.
• Be careful not to damage the insulation surface while taking measurements.
• Read and observe all warnings and precautions relating to electrical
safety for the measuring instrument being connected to the probe.
Do Not Operate When Wet
To prevent electric shocks, do not allow the unit to become wet and do not
use the unit when your hands are wet.
Do Not Operate Near Flammable Materials
Do not operate the probe in the presence of flammable or explosive liquids
or vapors.
Do Not Use When Removed from the Case
To avoid electric shock or fire, never use the probe if the case has been
removed.
* Do not exceed the following levels: 30 Vrms, 42.4 Vpeak, and 60 VDC.
