YOKOGAWA 701715, Руководство пользователя

Страница: 406 / 454

16-2
IM 701730-01E
16.2 Messages and Corrective Actions
Error Messages
A message (such as an error message) may appear during operation. This section
describes the meanings of the messages and their corrective actions. The messages
can be displayed either in English or Japanese (see section 15.1). Contact the dealer
from which you purchased the instrument if servicing is required.
The following messages appear in Japanese in the upper row, and English in the bottom
row. In addition to the messages listed below, there are communication error messages.
These messages are described in the Communication Interface User’s Manual (IM
701730-17E).
Status Messages
Code Message Corrective Action Sections
0 Aborted hard copy. – 11.2
1 Aborted file operation. – Chapter 12
2 Completed data store. – 12.1
3 Completed data recall. – 12.1
4 Completed GO/NO-GO. – 10.9, 10.10
10 Set to remote mode by communication Press SHIFT + CLEAR TRACE to enable local –
commands. mode.
11 Local lockout by communication commands. To operate the keys, release lockout using –
communication commands.
13 All settings will be initialized. Power up with – 4.4
the RESET key depressed.
21 Completed action-on-trigger. – 6.15
22 Executed unload. – 12.5, 12.7
23 Released the Preview mode. – 11.2
24 Some of the channels are set to 50 ohm DC input. – 5.4
To keep the settings, press the SELECT key.
Pressing any other key will change the settings
to 1 Mohm DC input.
25 Aborted the search. – 10.2 to 10.4
26 Executed the search, but no record was found – 10.2 to 10.4
that matched the conditions.
27 Executed the search, but no pattern was found – 10.2 to 10.4
that matched the conditions.
28 Pattern contains points that are between Thr – 10.4
Lower and Thr Upper.
29 MATH will be performed on all records. – –
Abort the operation by setting the history
Display Mode to One.
30 Aborted the recalculation of the MATH. – –
32 Aborted statistical measurement processing. – 10.7
36 Key invalid for this model. – –
48 Abort process is running. Wait until the – –
process completes.