YOKOGAWA 701715 Скачать руководство пользователя страница 356

Страница: 356 / 454

13-20

IM 701730-01E

13.7 Using the Web Server Function

You can use the Web server function on the instrument to display the screen image of

the instrument on your PC’s Web browser and perform file operations on the instrument

using the keys displayed in the Web browser.

This section contains the following information.

• Overview of the Web server function -> See this page.

• Operating conditions

• PC environment -> See page 13-21.

• instrument environment -> See page 13-22.

• Preparations for using the Web server function

• Preparations on the instrument -> See page 13-23.

• Preparations on the PC -> See page 13-24.

• Using the web server function

• Using the FTP server function -> See 13-28.

• Performing data capture -> See page 13-29.

• Displaying the measurement trend of waveform parameters

-> See page 13-35.

• Using control scripts -> See page 13-39.

• Showing the log -> See page 13-41.

• Showing the instrument information -> See page 13-43.

• Viewing the link destination -> See page 13-44.

Overview of the Web Server Function

FTP Server Function (on a Web Browser)

View the list of files stored on the storage medium of the instrument (built-in storage

medium) and transfer files to the PC.

Data Capture

The following operations can be performed.

• Change the display format of the instrument and display data that is acquired in the

history memory.

• Display the screen image of the instrument.

• Save the waveform data and setup data to the PC.

• Load the setup data stored on the PC into the instrument.

Displaying the Measurement Trend of Waveform Parameters

Using the Excel function, display the trend of the selected waveform parameter values.

The statistics of the measured values can also be computed.

Control Script

Control the instrument using communication commands (see the

Communication

Interface User’s Manual (IM701730-17E)

Log

Displays the past log of errors that occurred on the instrument, GO/NO-GO

determination, and action-on-trigger. Up to the thirty newest incidents are logged.

Instrument Information

Displays the model of the instrument, the presence/absence of options, the ROM version

(firmware version), etc.

Содержание 701715







































































































































































































































































































































































































































































Результаты поиска

Содержание 701715

Отзывы:

Похожие инструкции для 701715

Бренды по названию

Популярные бренды

YOKOGAWA 701715, Руководство пользователя

Результаты поиска

Содержание 701715

Отзывы:

Похожие инструкции для 701715

Бренды по названию

Популярные бренды