YOKOGAWA 51001, Руководство пользователя

Страница: 21 / 31

- 20 -
Separation of Light Detector
This illuminance meter can be used with the light detector and main unit
separated. Prepare a dedicated connection cable (an accessory sold
separately).
1. Turn off the power.
2. Press the eject button and the release lock to separate the light detector
from the main unit.
3. Insert the plug (the plug with the eject pins) of the connection cable into
the main unit and confirm that the connection is locked.
4. Connect the other end of the connection cable (the plug with the
YOKOGAWA logo) to the light detector and confirm that the detector is
locked to the connector.
5. Turn on the power to start measurement.
6. To disconnect the connection cable, press the eject buttons both on the
plug connected to the light detector and on the main unit to release the
two locks.
Eject button
Eject pin
YOKOGAWA logo
Eject button
Figure 11. Connection with Separated Light Detector
· The application of this accessory could affect the immunity performance of
the product and such items should be used with this consideration.
· Interconnection with other apparatus is not recommended.
Note