
ENGLISH
13
Step 5
Press the button SELECT to choose the ice size you may need
Note: when temperature lower than 15degrees,S/SMALL is recommended, when temperature over
30degrees,L/LARGE ice is recommended.
Step 6
Ice making cycle begins, ice will be frozen onto the evaporator fingers.
Note: the ice making time depends on the ambient temperature
Step 7
Once ice making cycle is finished, the water tray will tilt forward; the remaining water flows back to the
water reservoir and the ice cubes will drop from the fingers.
Step 8
In about 15-35 seconds, the water tray will tilt backward, ice cubes will be pushed to ice reservoir directly,
unit back to work from step 4 to step 7 again
Step 9
Push the ice cube dispenser puncher button(sketch 6) to get ice, the indicator
will be on
Note: Please put your cup below the ice cube dispenser shoot directly.
Notice: If the ice is stored in the unit for long time,the ice may freeze and stick together,then no ice will be
dispensed even the ice is full,if so,please kindly use scoop included in the unit to break the ice
first,then push the puncher button.
Step 10
Press OFF button to stop the unit
Step 11
When you push the WATER button, you can get water
Note: if you need to get cold water,at least the ice making function should be turn on.
Please make sure your cup is below the cold water outlet,or water will be splashed every where
CARING
1. Clean the inner liner, ice collecting tray, water box, ice shovel and evaporator frequently. When
cleaning, unplug the unit and remove the ice cubes. Use a diluted solution of water and vinegar to
clean the inside and the outside surface of the Ice maker. Do not spray Ice maker with chemicals or
diluted agents such as acids, gasoline or oil. Rinse thoroughly before starting.
2.Keep ventilation openings in the appliance enclosure, or in the built-in structure, clear of obstruction.
Do not use mechanical devices or other means to accelerate the defrosting process, other than those
recommended by the manufacturer.
3.If the icemaker is reused after a long time, the water pump may not pump sufficient water due to an air
block, the deficient water indicator turns on in this case. To correct this restart the machine, then the
icemaker will work normally.