We create security
Installation
Drill a hole
Inside: Diameter is 8mm
Outside: Diameter is16mm
Doo
r lea
f
Drill holes based on the
marked positions.
Make a combination
based on the picture.
Hollow Metal Door Wooden Door Metal Surface Door
Drill a hole
Inside: Diameter is 8mm
Outside: Diameter is 12.7mm
Inside:Drill a hole
diameter is 8mm folding
the plastic straight pin
36mm
Steps
Fold the plate to 90 .
Close the door first, then
place the upper side of
template on door frame,
while adjust the left side
next to the door leaf.
Template
Door Frame
Door leaf
Template
Doo
r Fra
me
Doo
r lea
f
Tem
plate
Mark screw positions of
armature plate and magnetic
lock on door leaf and door
frame respectively.
Setpin
Strike the pin into the
armature plate slightly
(to avoid movement).
Make a combination based
on the picture(add washer
accordingly).The rubber ring
must be added.
Place the rubber ring
between armature plate
and door leaf.
Allen Key
Use Allen key to remove
the mounting plate from
lock body.
Rubber ring
Fix the mounting plate on
the door frame according
to the holes drilled earlier.
Use Allen key to screw
the lock body on the
mounting plate.
After all the appropriate
procedures, the holding
force can be maximized.
Finally, fix the tamper
screw.
Screw door
Wire
Wire
Allen Key
Close the door to test
holding force. The angle
between armature plate
and magnetic lock can
be adjusted by adding
or reducing washers.
