tested
Germany
EMC
R
OPERATION
www.yli.cn
We create security
1.Read Card but can't open the door
A: Read Card with sound, but Green LED is OFF, please check the card is registered or not/
B: Read Card with sound, but Red LED and Green LED twinkle alternately, please check the Operation Mode
C: Read Card with sound and the Greed LED is ON, please check the wire connection is ok or not.
2. Read Card but no reaction
A: Check the card is ID or not, or the card is broken
B: Check the Operation Mode, Code Mode maybe shield the Card Function
C: Check the LED indication, Red LED is OFF, Green LED is ON, means the door is opening state
3. Press Keyboard but no reaction
Check the LED indication, Red LED is OFF, Green LED is ON, means the door is opening state
4. Buzzer is sound all the time
Check the anti-vandal switch is closed or not
9.ESC
Press *
10. Modify the Code of Card (Setting under the Card + Code Operation Mode)
Press (Green LED: ON) Read the card (This card is registered card) Enter the Old Code
*
(Red LED and Green LED: twinkle alternately) Enter the New Code # Enter the New Code
again # (Green LED: OFF; Buzzer: DI DI)
Remark: If failure, the Buzzer will sound DI (long)
Returning to Factory Default (Only return the Program Code and System Parameter,Card can't Deleted)
Cut off power (electricity) put the jumper JP1 in 2-3 position connect the power (DI DI<short>)
Put the Jumper JP1 in 1-2 position
MALFUNCTION JUDGMENT
WIRE INTRODUCTION
7 Wires (Main Port)
RED
BLACK
YELLOW
WHITE
BLUE
GREEN
GREEN
+12V
GND
NC
COM
NO
OPEN
GND
5 Wires (Card Reader Port)
RED
BLACK
GREEN
WHITE
BLUE
+12V
GND
D 0
D 1
LED BUZZER
P
3
