HOW TO WEAR YOUR HELMET
1. Adjust Lining Cushion
The inner side of the helmet is provided with a pad, which can cushion and absorb sweat.
You can gently tear it off and clean it. Please paste it carefully during installa on.
2. Tighten the Buckle
The buckle is the main way to fix the helmet. Before wearing, be sure to ghten the buckle
and fix it at one end of the helmet. The reserved length of the buckle is recommended to be
determined by yourself according to your needs.
3. Adjust the Tightness
A er wearing the helmet, you will touch a knob at the back of the helmet. Turn the knob to
adjust the ghtness of the helmet. The comfortable handle of the knob will make you more
focused on the ghtness experience.
4. Test for Tightness
A er adjus ng the rear knob, lower your head and lt your body forward with the buckle
unfastened. If the helmet does not fall stablly, it indicates that your adjustment is
appropriate enough.
5. Adjusting Y-buckle
Next, let's adjust the Y-bu on on the e. It has a great impact on the comfort of wearing
the helmet. You can pull up and down the Y-bu on to the appropriate posi on. It is
recommended to be close to the lower part of the ear as far as possible without affec ng
the comfort of the ear.
6. The Pulling & Inserting of Fasteners
The helmet adopts a bolt type connec on mode. The connec on can be realized by inser ng
the male head of the bolt into the female seat and fastening it. When unlocking, just press
the elas c buckle rod on the side of the male head of the bolt.
7. Adjust the Tightness of the Chin
A er the fastener is buckled, the ghtness of the whole buckle can be adjusted. Holding one
end and pulling the tail of the belt at the other end can easily fasten the buckle
8. Recommended Tightness
If the buckle is too ght, it will cause discomfort, but if it is too loose, it will not work. We
suggest that two fingers can be inserted between the buckle and your chin.
ENGLISH
4
