Thank you for purchasing a YITAHOME product. To ensure correct function and safety,
please read and follow all the instructions before using the product.
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
1
2
SAFETY GUIDELINES
1. To avoid possible electric shock, turn off the electricity at the main fuse box or circuit panel before you begin installing
or servicing the fan.
2. Read and follow all instructions and safety guidelines carefully before installing.
3. Make sure all electrical connections comply with the local codes or ordinances and the National Electrical Code. If you
are unfamiliar with electric wiring, please consult a qualified and licensed electrician.
4. Make sure there is sufficient space to rotate the blades of the fan, which is at least seven (7) feet of clearance between
the floor and the fan blade tips. The fan should be mounted at least thirty (30) inches from walls and/or other upright
structures.
5.
WARNING:T
he outlet box and ceiling support joist used must be securely mounted, and capable of supporting at least
100 pounds . To reduce the risk of fire, electric shock or personal injury, mount to the outlet box marked “acceptable for
fan support” and use mounting screws provided with the outlet box. The box must be supported directly by the building
structure.
6.
WARNING:
To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked "acceptable for fan
support" and use mounting screws provided with the outlet box. Most outlet boxes commonly used for the support of
lighting fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in
doubt.
7. Electrical diagrams are for reference only. Light kits that are not packed with the fan, which must be UL listed and
marked suitable for use with the fan model you are installing . Switches must be UL. general-use switches. Refer to the
instructions packaged with the light kits and switches for proper assembly.
8. After assembling, check that all connections are firmly secured.
9. After making electrical connections, spliced conductors should be turned upward and pushed up carefully into outlet
box. The wires should be placed separately from the grounded conductor and the equipment-grounding conductor on
opposite side of the outlet box.
10.
WARNING:
To reduce the risk of electrical shock and fire , do not use this fan with any solid-state fan speed control
device, or rheostat.
11. Do not operate the reverse switch until the fan has come to a complete stop. 12.Do not insert anything into the fan
blades while they are rotating.
13.
WARNING:
To reduce the risk of personal injury, do not bend the blade brackets (also referred to as "flanges") during
assembly or after installation. Do not insert objects into the blades.
14. To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.
15. Do not use water or detergent when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be
suitable for cleaning.
NOTE:
The important safety precautions and instructions on the manual are not meant to cover all possible conditions
and situations that may occur. It should be understood that common sense and caution are necessary factors
during the installation and operation of the fan.
NOTE:
This product is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities that are different or impaired, or lack of experience and/or knowledge, unless such persons are
supervised and/or trained to operate the appliance by a person responsible for their safety.
NOTE:
Children should be supervised to ensure that they do not use appliances as a toy.
NOTE:
You must install a switch or circuit breaker that disconnects all power poles of at least 3 mm between each pole.
BEFORE YOU START
1.The input power for this fan must be 110V .
2.The electrical installation must be carried out by a qualified electrician.
3.To reduce the risk of electric shock, make sure the electricity is turned off
before mounting or dismounting the fan. The power cables for assembly must be earth,
positive and neutral.
4.Make sure all screws are assembled and tightened during assembly.
5.To reduce the risk of injury, do not touch the blades when the fan is running.
Insulating tape Double Open
End Spanner
Flat-bead
Screwdriver
Philips
Screwdriver
Stairs
Pliers
PRODUCT INSTRUCTURE
