ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
5
6
2.Pairing New Remote
The remote and main unit is 1 to 1 paired as default. Further more, main unit can be paired to 3
remote controllers and each remote controller can be paired to any main unit. Please do
following steps to pair new remote controller:
1).Plug off the power of main unit and plug in after 5 seconds.
2).Press 'SPEED-' and 'SPEED+' key together in 5 seconds after power on.
After this operation, the main unit will recognize the new remote controller.
3.Free Remote Pairing Mode
In some specific cases; the main unit may need to be paired to any remote controllers.Please do
following steps for free remote pairing mode:
1).Plug off the power of main unit and plug in after S seconds.
2).Press 'ON/OFF' and 'MODE+'key together in 5 seconds after power on.
After this operation, the main unit will recognize any remote controller. To pair the main unit
back to specific remote, please repeat the 'Pairing New Remote' operation.
4.Switch Output Color Sequence
The controller's default output signal sequence is
Common-Green-Red-Blue. If the LED application is in different cable sequence,the direct color
keys will not match the LED color. In this case, user can adjust the output signal sequence with
following steps:
1).Plug off the power of main unit and plug in after 5 seconds.
2).Press'RED'and'BLUE'color key together in 5 seconds after power on.
With this operation,the output sequence will switch between 6 possible combinations. The
sequence will be memorized and it won't change before next same operation.
