21
/
32
System Sound
Switch “ON” or “OFF” to control omnos open or close System Sound.
Figure 19. Switch of System Sound
Subwoofer Settings
Switch to subwoofer setting page by either
[
Settings
]
[
Subwoofer
] or
[
Connection
Status
]
[
Subwoofer
], there’re three options for adjustment.
Subwoofer Gain: to control the bass power. The bigger, the deeper.
Crossover Frequency: the higher this value, the more signal is coming from the
subwoofer.
Subwoofer Phase: To adjust the delay between subwoofer and Soundbar. For your
listening position, there must be an optimal phase to optimize the bass effect.
Advanced Settings
Automatic Standby
Omnos provides this functionality for power saving. System will enter standby mode,
when no source input for 30 minutes. You can switch on/off the power consumption
saving mode from [
Settings
]
[
Advanced Settings
]
[
Automatic Standby
].
Switch “ON” or “OFF” to enable/disable Omnos ‘
Automatic Standby
’ mode.
Upgrade Checking Period
Omnos provides the functionality to check the firmware version periodically. You can
set the period from [
Day
], [
Week
] to [
Month
] from [
Settings
]
[
Advanced Settings
]
[
Upgrade Checking Period
].