YILMAZ PCC 6505, Руководство пользователя

Страница: 124 / 204

7. OPERATION 122
7.8. Manual Movement Of The Machine's Units;
To move the saw angularly;

The angle of rotation of the saw is the axis "A". The saw can angularly move between "30 and 150
degrees" on its axis. To make this move;
o
As long as the button is held, the saw moves towards 30
degrees within the permitted limits
o
As long as the button is held, the saw moves towards 150
degrees within the permitted limits.
o
At the window it can be seen at what angle the saw
is.
o
When the angular position where the saw is desired to go is entered (between
30 degrees and 150 degrees), this angle can be reached by clicking on aciya git (go to angle)
button.
To move the saw up and down in the cutting direction;
The up and down movement of the saw in the cutting direction is the "A" axis. To make this move;

o
As long as the button is held, the saw moves down within the
permitted limits.
o
As long as the button is held, the saw moves up within the
permitted limits.
o
The height which the saw is can be seen from window.
o
If the height where the saw is wanted to go is written (between -30 and 170) in the white
window and button is pressed, the saw goes manually to the
desired height.