YILMAZ KP 120 Скачать руководство пользователя страница 41

41 

9.  WARRANTY CONDITIONS 
 

1.  The warranty period is 

2

 years from the delivery date of the machine. 

 
2.  All parts of the machine are under the warranty of our company. 
 
3.  If the machine has a defect within the warranty period, the warranty period is extended by the repair  period. The repair 

period  of  the  machine  is  max.  30  working  days.  This  period  begins  with  the  date  of  notofication  of  the  defect  to  the 
service station, or if there is no service station, to the authorized dealer, representative, agent, importer or manufacturer. 
If the defect cannot be repaired within 15 working days, the manufacturer or importer has to deliver the customer another 
machine with similar features until the repair has been completed. 

 
4.  If the machine has a defect due to material, workmanship and assembly fault, the repair will be carried out without any 

charge for parts, labor or any other charges. 

 

5.  The  customer  can  request  the  replacement  of  the  machine  or  the  return  of  the  purchase  price  or  discount  in 

proportion with the fault if;  

 

5.1. 

The same defect occurs more than twice within the stipulated warranty period after the delivery, or in case of more 
than four different defects within the stipulated warranty period., or if the total defects of different defects exceeds 
six defects, and makes the machine unusable,

 

5.2. 

The repair period for the machine is extended,

 

5.3. 

It  is  determined  with  a  report  of  the  service  station,  or  in  case  that  there  is  no  service  station,  by  the  dealer, 
representative, agent, importer or manufacturer, that a repair of the machine is not possible, 

 
6. 

Defects due to use of the machine in contrary with the features described in the machine’s user’s manual are excluded 
from the warranty. 

 
7.  In  connection  with  any  issues  of  the  warranty  certificate  the  customer  may  contact  the  General  Directorate  of  the 

Consumer and Competition Protection of the Ministry of Industry and Trade 

 

Содержание KP 120



























































Отзывы: