YILMAZ 300, Руководство пользователя

Страница: 56 / 101

56
DISPLAYING THE REQUIRED DIMENSION
a. Manual Selection

By pressing button, machine is taken into manual transition mode. In manual transition mode,
“MANUAL” is displayed on the button and light is in red color.

The required program number is selected in the given figure which is part of the
screen.

The recorded values (length, quantity, etc.) on the first line of the list are displayed on the screen.

After the required dimension is provided, conveyor support is located at demanded position by pressing the
button. When the support reaches the desired position, machine allows doing necessary
operations.
Following the completion of operation, next program number is selected in section by
using the buttons located on left< and right> sides, and support is re-located at the demanded position.