YILKAR YK 400, Инструкция по установке, Страница: 25 / 42

21
90
45
YLK 12/24
Control unit
Surface to be
mounted
For assembly, first cut the selected surface in accordance with the unit, and then mount the
unit by inserting these nails onto the surface.
4.4 Electrical Connections
The unit location should be ergonomically chosen as a flat surface in an area
accessible to the driver. Mounting surface dimensions should be 90x45 mm.
Assemble the control panel sockets to the unit as shown in the figure. Check the locks
after assembling.
4.4.1 Control Un t Mount ng
EN