M260 Series IP MODEM User Manual
Yifan Industry Co., Ltd.
Page 21 of 33
Tel: +86 592 6101492
Fax:+86 592 5222813
Email: [email protected] , [email protected]
Website: www.yifanwireless.com
Data Trigger On
If it was empty, any data form serial can trigger the IP Modem. The
first frame data will be discarded because the IP modem was in deep
sleep state.
If it is not empty, only the data matching to the “online data” can
trigger the IP Modem.
Data Trigger Off
If it was empty, the IP Modem kept online.
If it is not empty, only the data matching to the “offline data” can made
the IP Modem offline.
Trigger Port
Set the trigger data source from PORT1 or PORT2
Data Format
Format of the trigger data: Text or HEX
I/O
：
Sleep and Wake up
Made the IP Modem sleep or wake up via I/O level. If the I/O was in high level or suspend, the
IP Modem was sleep. Otherwise, It would trigger the IP Modem wake up.
Sleep/Wakeup
Made the IP Modem sleep or wake up depended on the I/O state
I/O
Set I/O port to trigger the IP Modem to sleep or wake up
MIXD
the combination of SMSD, CTRL, DATA. IP MODEM will be online when meet one of these
three trigger methods.
