www.yictechnologies.com
Right click on the graph to display menu.
Selecting Open Scan Data Description will give information about the scan. If you select Edit
Overlay you can change the Overlay post-scan to, for example, match the emissions with
the Gerber of different layers instead of the usual Bottom or Top layer. Or you could correct
the position of the Overlay You can select a block of cells on your current spatial scan and
then, by clicking on Confirm Selected Cells for New Scan, the Spatial Scan Probes settings
have automatically been changed to these highlighted cells. It is easier than trying to
remember the area of the board on which you want to focus for a new scan with smaller
RBW for example for better sensitivity or les cells for faster scan rate.