6
5
4. Charging the Battery
5. Attaching the strap
3
4
2
2)
Removing the lens
Press the lens release button while rotating
the lens in the direction of the arrow.
You can use the USB cable to charge via adapter or PC. 5V/1A power adapter is recommended.
Charging via USB: takes about 3 hours for complete charge.
Charging with charger accessory: takes about 2.5 hours for complete charge.
Charging time depends on battery lifetime and environment conditions.
Also if the battery has not been used for a long time, it takes longer to charge.
NOTE: If nothing appears on the LCD monitor after connecting the camera to a computer, the battery may be out of
power. Please keep the camera connected to the computer until the battery has charged, then disconnect and
connect the camera again.
Untighten the screw
Insert one side of the strap go through
the eyelet.
Once the screw is tightened and the strap
is placed, repeat the same steps with
the other side of the strap.
Tighten the screw to secure the strap
and leather pad
1
1