3)、Wiring lnstallation Diagram
Tip: Make sure you use the correct USB car charger model before using YI Dash Camera.
In some cars, the USB car charger is on even after the engine is turned off, and it consumes
battery. If this is the case, please turn off your camera manually after you switch off the engine.
Open the strap at the
bottom of the rearview
mirror
Installing the device
Install the power cable
around the trim of your
vehicle
Insert the car charger into
your vehicle’s cigarette
lighter port and connect
the USB cable
1
2
3
4
Place the device in the
center of the rearview
mirror, and lock the strap
from the top to the bottom
1. After receiving the product, please check if it works properly before installing.
2. If the video and light need to work together while reversing, connect the red cable
to the positive terminal of the indicator light, and the black cable to the negative
terminal of the indicator light.
3. Take the help of a professional to install the device. Before installing, please confirm
if there are any tiny adjustments required.
Camera unit
6-meter extension cord
Connect the red cable to the positive
terminal of the indicator light, and the
black cable to the negative terminal.
Rear Camera Installation
