V2.3.0 OM-UNN valid from 15
th
April 2015
20
3.6
Loading and Removing of Cartridges
The cartridge is held in place by the cartridge holder carousel with a spring that pushes it into its slot to keep
it tightly fixed. When inserting the cartridge, it is necessary to push the cartridge inward and then leave the
spring to push back the cartridge into the retaining edges at the end of the slot. To remove the cartridge,
push the grip of the cartridge inward. Then, free the holder of the cartridge from the retaining edges of the
carousel and remove the cartridge from the carousel directly. (See Fig. 3-3).
Fig. 3-3 Loading and Removing Cartridge
It is recommended that users should practice loading and removing process with an empty cartridge to gain
some experience.
Fig. 3-4 Practice of Loading and Removing Cartridge
During loading and removing of the cartridge, the cartridge holding carousel can be turned freely.
